Pyro Industries API-1394PCI Manual de usuario descargar pdf (Pagina 254)

233

■ DIGITAL CUT

If your deck is not listed under the manufacturer’s name, you might be able to

find the template on Avid’s website. Avid frequently adds or creates new templates

because new decks and cameras come out frequently.

Another option is to select a Generic deck, which follows standard protocols for

controls of OHCI and RS-422 controllers. It is not particularly sensitive to the full

capabilities of a specific deck, but it can fulfill the needs of just about any deck.

If your deck has neither RS-422 nor OHCI capability, you need to control the

deck manually. In cases such as these, there is no need to configure a deck because

the deck cannot be controlled by Xpress Pro. When you access the Digital Cut tool,

select Local for deck control. In the Deck Control section, you’ll notice that No Deck

appears where timecode would normally be.

Deleting Deck Configurations

If you need to delete a previous deck configuration, do the following:

1. Go to the Project window and click the Settings tab.

2. Select Deck Configurations.

3. Click the deck and Shift-click the channel. Or you can lasso them both in the

Deck Configuration tool.

4. Press Delete. The deck configuration disappears.

Okay, so we have finally gone over the options and are ready to actually take a

look at the Digital Cut tool.

Digital Cut Tool

The Digital Cut tool will look different, depending on whether you have a software-

only system or a system with the optional Mojo. To open it, choose Clip

> Digital Cut

(see Figure 6.26).

Figure 6.26 Selecting Digital Cut

4440c06.qxd 11/6/05 9:39 AM Page 233

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 370 371

Sin comentarios

Pyro Industries API-1394PCI Manual de usuario Pagina 254