Pyro Industries API-1394PCI Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 23
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
Page 6 of 23 Joe ConfortiAvid Technology May 9
th
, 2011
Rev H
5.) 1394 (Adrenaline / Mojo) DNA configuration requirements (slot #1 requirement)
1394 Adrenaline and 1394 Mojo must connect via an add-in 1394a Firewire card (with 4K buffer) installed in Slot #1
The XW8600 embedded 1394 port cannot be used.
Qualified Firewire card: 1394a 4k Buffer Firewire Card, Avid P/N: 7030-20154-01, PCI 32-bit/33MHz
6.) Utilization of the XW8600 embedded (on-board) 1394 ports.
Configuration
On-board 1394 Utilization
Notes
1394 Adrenaline H/W
1394 Mojo H/W
Configs
No, do not use on-board 1394.
Avid specified add-in 1394a
controller required in slot #1 for
1394 Adrenaline / 1394 Mojo
connectivity.
Embedded 1394 Not supported for connectivity to
AVID 1394 DNA (Adrenaline / Mojo) hardware.
For Adrenaline / Mojo configs the embedded 1394 controller
cannot be used. An add-in 1394 controller with 4K buffer is
required in slot #1. The 1394 add-in controller in slot # 1
shares same bus as embedded 1394 ports which results in
the inability to use the on-board 1394 for any purpose with
1394 Adrenaline and 1394 Mojo configurations due to
potential system bus contention issues..
DX Hardware
Or
Matrox MX02 Mini
Hardware configs
Or
AJA IO Express
Hardware configs
Yes - Supports 1394 Deck /
Camera / Disk Drive
(
1394 disk drives are recommended only
for file transfers)
Please Note: The XW8600’s embedded 1394
controller / ports share the same bus as slot#1 (PCI
32bit /33MHz). As a result slot#1 must be left empty
for DX, Matrox MX02 or software only configurations
when using the embedded 1394 ports for camera /
deck interface to avoid system bus contention issues.
S/W Only
Yes - Supports 1394 Deck /
Camera / Disk Drive
(1394 disk drives are recommended only
for file transfers)
7.) Secondary 1394 port for 1394 Adrenaline and 1394 Mojo configs
For all 1394 Adrenaline and 1394 Mojo configurations, a secondary 1394 port (for support of a 2
nd
1394 device such as
a Camera / Deck / Disk drive) must be established via an add in PCI-E 1394 controller installed in slot #3. For further
details see information above for slot #3 configuration
8.) 1394 Adrenaline / 1394 Mojo-SDI / Win7 Flamethrower issue
Windows 7 users running 1394 Adrenaline / 1394 Mojo-SDI DNA hardware, may experience random Flamethrower
errors when working with Media Composer 5.0 and NewsCutter 9.0. To resolve this, use the Legacy OHCI 1394 driver.
For more details, see KB article 373959 (link below):
http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=373959&ssdFilterCommunity15=1408&ssdFilterCommunit
y13=0&ssdFilterCommunity11=0&ssdFilterCommunity10=368&ssdFilter_SearchKeyWord=Win7+legacy+driver&page=1
&ssdSearchOperator=0&ssdFilterCommunity3=0&Hilite=Win7+legacy+driver
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 22 23

Comentarios a estos manuales

Sin comentarios